Tata Yellow Floor Iron Oxide 1 kg
Tata Yellow is a highly concentrated dry powder of the finest grade and is ideally suited for use in cement floors. It is light and alkali fast, non-toxic and inflammable and produces attractive shades. A floor made of TATA Yellow can withstand repeated washing with water and can be polished with any floor polishing materials and be buffed.
Salient Features
• Tata Yellow is ideally suited for flooring and they have the best mobility with cement.
• Resistance to alkali and light fastness are excellent
• Tata Yellow furnishes the floor with a bright, shiny and smooth surface.
• Tata Yellow is non toxic and non inflammable
• Tata Yellow has permanent colour stability and resists fading.
Colour | Bright Yellow |
Tata iron( as Fe2 O3) | 67-68% |
Matter Soluble in Water | 1.0%(max) |
Acidity( as H2SO4) | 0.15% |
Residue on sieve(over BS 240 mesh) | 0.75% |
Volatile matter | 1.00%(max) |
Bulk density( g/t) | 350-450 |
Uses
Tata Yellow is highly apt for colouring of cement and mosaic floors, tiles, dadoes and plastic works colour wash.
Application Procedure
Complete and careful mixing of the Tata Yellow colours and cement is imperative for best results. Tata Yellow should be mixed with grey or white cement in the proportion 1:3 or 1:4 (colour of cement), depending upon the desired depth of the colour- [Grey cement is recommended for deep shades and white cement for pastel shades].
Moreover, to eliminate the occurrence of patches and also to produce a smooth and uniform finish, the colorant and cement must be mixed in a dry state before adding water. The mixture has to be applied by trowelling. A 24- hour gap has to be maintained before curing is undertaken for setting.
Precaution
• For better results, it is necessary to prepare a homogenous mixture of Tata Yellow and Cement in a dry state before adding water.
• The chore of mixing and application must be done by an experienced mason.
• The dry mixture should be prepared just before applying it.
• The wet floor surface must be protected from dust, direct sun light and damage of any other nature.
• Use of chalk powder with the dry mixture of colours and cement must be avoided as it dilutes the intensity of the
colour
• Any contact between Tata Yellow and acids or acidic materials must be prevented.
• Tata Yellow may be used for interior and exterior applications.
Polishing
Buffing and polishing should be undertaken after the floor has been allowed to dry for a week. More time will ensure better setting.
Covering Capacity
1 kg of Tata Yellow, when mixed with cement in the ratio of 1:5 and applied so as to have a floor thickness of 1 mm, will cover the below mentioned floor area:
Tata Yellow 60 square feet
Manufacturer | TATA |
---|---|
Type of Store Credit value | Select |